Ford FE dvigateli - Ford FE engine

Ford FE V8
Umumiy nuqtai
Ishlab chiqaruvchi	Ford Motor Company
Shuningdek, chaqirildi	Ford FT V8
Maket
Konfiguratsiya	OHV V8
Xronologiya
O'tmishdosh	Ford Y-blok V8
Voris	Ford 335 seriyali dvigatel Ford 385 seriyali dvigatel

The Ford FE dvigateli a Ford V8 dvigatel 1958 yildan 1976 yilgacha Shimoliy Amerika bozorida sotilgan transport vositalarida ishlatilgan. FE qisqa muddatli (AQShda) o'rnini bosuvchi vosita sifatida ishlab chiqarilgan Ford Y-blokli dvigatel, qaysi Amerika avtomobillari va yuk mashinalari ortib ketgan. Bu xona sezilarli darajada kengaytirilishi bilan ishlab chiqilgan bo'lib, u ham yuqori moylovchi, ham yonma moy sifatida ishlab chiqarilgan va 332 kub (5,4 L) dan 428 kub (7,0 L) gacha bo'lgan hajmda ishlab chiqarilgan.

"FE" "Ford-Edsel" dan kelib chiqadi.^[1] 1964 yildan 1978 yilgacha o'rta va og'ir yuk mashinalari va maktab avtobuslarida foydalanish uchun mo'ljallangan FE liniyasining versiyalari "nomi bilan tanilgan"FT, "Ford-Truck" uchun,^[2] va birinchi navbatda po'lat borligi bilan ajralib turardi (o'rniga tugunli temir ) krank mili, kattaroq krank mo'ylovi, kichikroq portlar va klapanlar, turli distribyutor shaftalari, turli xil suv nasoslari va uning qismlari uchun temirdan ko'proq foydalanish.

Foydalanish

Dengiz dasturlarida nisbatan engil FE dan foydalanish uchun keyingi sotuvni qo'llab-quvvatlash darajasini ko'rsatadigan qayiqlarga FE o'rnatish uchun oldingi o'rnatmalar

FE seriyali dvigatellar avtomobillarda, yuk mashinalarida, avtobuslarda va qayiqlarda, shuningdek sanoat nasoslari va boshqa uskunalarda ishlatilgan. Ford dvigatelni 1958 yildan ishlab chiqardi va 1976 yilda ishlab chiqarishni to'xtatdi. Keyingi bozor qo'llab-quvvatlash davom etdi, zaxira qismlar bilan bir qatorda ko'plab yangi ishlab chiqilgan va takomillashtirilgan komponentlar bilan.

Ford avtoulovlarida FE birinchi navbatda to'liq va o'rta hajmdagi yengil va yuk mashinalarida ishlaydi. FE o'rnatilgan ba'zi modellar:

Ford Galaxie,Ford Custom 500,Ford Mustang,Ford Thunderbird - 3-avlod,Ford Thunderbird - 4-avlod,Ford LTD,Ford Torino,Ford Ranchero,Ford Talladega,Ford Fairlane,Ford Fairlane Thunderbolt, va F-seriyali yuk mashinalari, odatda, faqat 1 tonna va undan kam sig'imga ega.

Ford va Mercury markali avtoulovlarda foydalanishdan tashqari, FE avtobuslar va qayiqlar kabi o'z mahsulotlarida foydalanish uchun uchinchi shaxslarga sotilgan. Shuningdek, FE sug'orish nasoslari, generatorlar va boshqa texnikani quvvat bilan ta'minlash uchun ishlatilgan, bu erda uzoq vaqt ishlaydigan, past aylanishli va ishonchli xizmat zarur bo'lgan.

Ford muntazam ravishda FE dizaynini yangilab turardi, ular muhandislik kodlari yoki qismlarning quyilish sonining o'zgarishi sifatida namoyon bo'ladi. Ishlab chiqarishga quyish kodlaridan tashqari, Ford "SK" va "XE" raqamlaridan ham foydalangan, agar uning qismlari bir martalik bo'lsa yoki ishlab chiqarish uchun tasdiqlanmagan ishlab chiqilgan bo'lsa. Fordning poyga dvigatellariga ulangan ko'plab qismlar SK va XE raqamlarini olib yurishgan.

Dengiz

Qayiqlarda o'rnatilgan FE-larga misollar

FE bloki ingichka devorga quyish texnikasi yordamida ishlab chiqarilgan bo'lib, u erda Ford muhandislari kerakli miqdordagi metallni aniqladilar va doimiy o'lchovli natijalarga erishish uchun quyish jarayonini qayta ishlab chiqdilar. Zavodda ishlab chiqarilgan Ford FE barcha temir komponentlari bilan 650 funt (295 kg), GM va Chrysler kompaniyalarining shu kabi etti litrlik takliflari esa 700 funt (318 kg) dan oshdi. Alyuminiy assimilyatsiya va alyuminiy suv pompasi yordamida FE ni 600 funt (272 kg) gacha kamaytirish mumkin. Ushbu vaznni tejash qayiqchilar va poygachilar uchun ahamiyatli edi. FE mashhur bo'lgan V-haydovchi zavod ilovasi sifatida mavjud bo'lgan dengiz dasturlari Asr qayiqlar.

1968 yildan boshlab AQSh dengiz kuchlari SEALS o'zlarining engil SEAL qo'llab-quvvatlash vositalarini (LSSC) quvvatlantirish uchun egizak 427 FE ishlatgan.^[3]

Poyga

Ford SOHC Hemi (Cammer) old dvigatel temir yo'l drayveri

Flopper Qiziqarli mashina FE

Amaldagi tunnelport crossram yonilg'i quyish GT40s

4 bilan FE Weber karbüratörleri raqobatda o'rnatilgan 427 AC kobralar

Ford GT40 Mk II 1966 yilda 1-2-3 tugadi 24 soatlik Le-Man. Haydovchi tomonidan Milya / Xulme, bu mashina 2-o'rinni egalladi.

1964 Fairlane Thunderbolt

FE dvigatellaridan foydalangan o'ziga xos modellarga quyidagilar kiradi AC kobra MKIII, GT40s, AC Frua, shuningdek, turli xil zavod poyga versiyalari Ford Mustangs, Ford galaktikalari, Ford Fairlanes va Ford Thunderbirds.

1960-yillarda, eng ko'p tashkil etilgan poyga tadbirlari aksiya qismlarini yoki keng omma uchun qulay bo'lgan qismlarni talab qildi. Uchun NASCAR poyga, qoidalar kamida 500 avtoulovni poyga sifatida jihozlangan keng jamoatchilikka sotishni talab qildi. Ko'pchilik drag poygasi va avtoulov poyga tashkilotlari o'xshash qoidalarga ega edilar, bu esa Ford dilerlik qismlarining hisoblagichlari orqali ishlash qismlarining keng doirasini taqdim etishga yordam berdi. Bunga qo'chimcha, keyingi bozor etkazib beruvchilar ishlash qismlari va aksessuarlarini ishlab chiqarishdi.

Fordning o'zi tomonidan FE-ni uning ko'plab poyga dasturlari va ishlash vositalarida quvvat qurilmasi sifatida ishlatishi uning hayoti davomida doimiy ravishda yaxshilanishga va muhandislik o'zgarishiga olib keldi. Keyinchalik FE-ning poyga ilhomlantirishi natijasida ishlab chiqarish dvigatellari tarkibiga kiritildi, yonilg'i quyish bloki, avval yog'ni blokning pastki qismlariga yo'naltirdi.

Yo'l va yugurish poygalari

1963 yilda 427 Galaktika NASCARda hukmronlik qildi, chunki 1963 yil yanvar oyida G.M. o'z bo'limlariga poygadan chiqib ketishni buyurdi. Tiny Lund 427 soniya bilan birinchi va beshinchi o'rinlarni egallab, yilning eng katta poygasi - Daytona 500 ni yutdi. Ford Plimutning 19-g'alabasiga 23 marta g'alaba qozondi. Plimutlar barcha g'alabalarini qisqa yo'llarda qo'lga kiritishdi, Ford esa super tezlikda ustunlik qildi, Chevrolet sakkizta g'alaba bilan, Pontiak esa to'rtta g'alabaga erishdi.

1964 yilda Ford eng yaxshi mavsumni o'tkazdi, 30 g'alaba. Dodj 14 bilan ikkinchi, Plimutda esa 12, Merkuriydagi beshta g'alabani qo'shganda, 427-da 1964 yilgi mavsumda NASCAR Grand National-ning 35 ta g'alabasi bor edi. Fred Lorenzen Atlanta 500-ni yutdi va keyingi etti musobaqaning oltitasida 426 Hemi dvigatelidan foydalangan Dodjes va Plimutlarni mag'lubiyatga uchratdi. Ford NASCAR tomonidan bir mavsumga ruxsat berilgan (1964) yuqori ko'taruvchi qabul qilish mos keladigan boshlardan foydalangan.

1965 yilda NASCAR Ford-ning dvigatelining yuqori stavkali versiyasini taqiqlab qo'ydi, chunki ular "stok" dudbo'ronlari ostiga kirmaydi. Chrysler-ning 426 Hemi-ga ham taqiq qo'yildi, 1966 yilda qaytib kelgan versiyasi o'sha yili ishlab chiqarish vositasiga o'rnatilgandan so'ng. 1965 yilgi mavsum uchun Ford yarim kamerali dvigatelning 427 rusumidagi o'z versiyasini ishlab chiqdi bitta tepalik kamerasi (SOHC) "Cammer" gemidagi klapanlarni boshqarish uchun boshiga bitta zanjirli qo'zg'aysan ustki mildan foydalangan. NASCAR dvigatelni taqiqladi. Keyinchalik Ford o'rtacha ko'taruvchini qabul qilish moslamasini ishlab chiqardi, u stok qalpoqchalari ostiga o'tirdi va NASCAR tomonidan qabul qilindi. Ford bilan harakatlanadigan Ned Jarret 1965 yilgi Buyuk Milliy chempioni bo'lgan va Ford NASCAR tojini qo'lga kiritgan.

Shuningdek, 1965 yilda Ford va Kerrol Shelbi yangi va takomillashtirilgan ishlab chiqarishni boshladi Kobra original 289 kub dyuym o'rniga 427 kub dyuym (7,0 L) FE yonilg'i moyi yordamida Vindzor kichik blokli. Bilan 3 ta "asosiy trubkani" kattalashtiradigan yangi shassi qurildi lasan buloqlari butun atrofda. Shuningdek, yangi mashina keng qanotli va radiatorning kattaroq ochilishiga ega edi. S / C (yarim raqobat uchun) "ko'cha" dvigateli 425 ot kuchiga (317 kVt) teng bo'lgan, bu 164 milya (262 km / soat) tezlikni ta'minlagan va 485 ot kuchiga (362 kVt) teng bo'lgan eng yuqori tezlik 185 milya (298 km / soat). Cobra Mark III ishlab chiqarilishi 1965 yil 1-yanvarda boshlangan va 1970-yillarda poyga uchun ishlatilgan. Original S / C 2011 yilda 1,5 million AQSh dollariga sotilib, uni eng qimmatbaho Cobra variantlaridan biriga aylantirdi.^[4]

1966 yilda 427 kub dyuym Ford GT40 Mk II hukmronlik qildi 24 soatlik Le-Man bir-ikki-uch natija bilan poyga.

1967 yilda, Parnelli Jons, a Xolman-Mudi Fairlane-dan ustun keldi, mavsumning ochilishida g'olib bo'ldi Daryo bo'yida 500 yo'l poygasi. Keyin, Mario Andretti ushlangan Daytona 500 Fairlane-da, Fred Lorenzen bilan Holman-Moody Ford-da bir soniyada. FE yana 24 soatlik Le-Man g'olibini quvvatladi. 1968 yilda poyga qoidalari o'zgartirilib, ma'lum sharoitlarda 302 kub dyuymgacha siljishni cheklab qo'ydi. Ford keyingi ikki yil ichida undan foydalanib g'olib bo'ldi Ford Vindzor GT40-dagi kichik blok.

Fordning poyga bo'yicha hamkori, xususiy Xolman-Mudiy, shuningdek, FE versiyasini ishlab chiqdi Mumkin poyga seriyasi. Unda zavod tomonidan etkazib beriladigan tunnel port boshlari, mexanik yonilg'i quyish tizimi o'rnatilgan va transkripsiyani qabul qilish kollektoriga o'rnatilgan va qayta ishlangan quruq zaharli moylash tizimi ishlatilgan, ammo faqatgina cheklangan muvaffaqiyatlarga erishildi.

Drag poygasi

Uyushtirilgan drag poygasi (NHRA, AHRA va hatto NASCAR 1960 yillarning o'rtalarida drag poyga bilan shug'ullangan) FE uchun har xil shakllarda asosiy joy bo'lgan. Ko'pgina innovatsion mahsulotlar ishlab chiqilgan va 1/4 milya tortish poygalarida ishlatilgan, chunki sotuvdan keyingi bozor etkazib beruvchilari dvigatel dizaynini maxsus qabul qilish moslamalari, eksantrik vallari, superchargerlar, kollektorlar, silindr boshlari, suv va yonilg'i nasoslari va egzoz sarlavhalari kabi mahsulotlar bilan qo'llab-quvvatladilar. Ammo Ford kompaniyasining o'zi drag-racer uchun eng kuchli mahsulotlar va platformalarni ishlab chiqdi. 1962 yildan boshlanib, 1964 yilgacha davom etgan Ford alyuminiy, shisha tolali va maxsus tanlangan komponentlardan foydalangan holda o'zining mashhur Galaxie modelining engil versiyasini qulaylik yoki uslubga nisbatan engilligini ta'kidladi. Ko'pgina qismlar transport vositasiga o'rnatilmagan, masalan, yo'lovchining old oynasini o'chiruvchi, ovozni o'chirish, qo'l dayamalari, isitgich va radio.

1964 yil oxirida Ford shartnoma tuzdi Xolman va Mudi tanlovda ishtirok etish uchun 427 ta quvvatga ega o'nta Mustangni tayyorlash Milliy Hot Rod Assotsiatsiyasi 1965 yilgi drag poygasi mavsumida (NHRA) A / Factory Experimental Class. Ushbu maxsus Mustanglardan beshtasi 1965 yilgi NHRA Winternationals-da o'zlarining debyutlarini o'tkazdilar va u erda Factory Stock FX Eliminator sinfida qatnashdilar (faqat chet el avtomobillarida). Bill Lauton boshqargan mashina sinfni yutib oldi.^[5]

1964 yilgi model uchun Ford ikkita eshikli Fairlane 500 sedaniga asoslangan Thunderbolt-ni taqdim etdi. 427 yuqori ko'tarilgan dvigatelni qabul qilish uchun o'zgartirilgan, u katta Galaxie modelidan indüksiyon tizimini va harakatlantiruvchi qismlarni tozalash uchun ko'z yoshi shaklidagi pufakchali kaput bilan jihozlangan. Ikkala ichki faralar yo'q qilindi va ularning o'rniga ikkita to'rt barrelli uglevodlarga to'g'ridan-to'g'ri uzatiladigan havo kirish joylari o'rnatildi. Bu birinchi navbatda sanoat edi, faqat kalitni tortib oluvchi mashina keng jamoatchilikka taqdim etildi.^[6] Biroq, avtoulovga kiritilgan keng ko'lamli o'zgartirishlar Ford tashqi ko'rinish sifat standartlariga javob bermadi.^[7][8]

BU MOSHINA MAXSUS MAQSAD Yengil engil raqobatbardosh mashina sifatida qurilgan va ba'zi bir shisha tolasi va alyuminiy tarkibiy qismlarini o'z ichiga oladi. FORD MOTOR KOMPANIYASINING MAXSUMIMA OZIRISHI, NORMAL SIFAT STANDARTLARINI QO'LLASh UChUN BU MOSHINA TAShKIL ETILGANI UChUN MAXSUS MAQSADI, PANEL FIT VA INFEKT NARXLARI Ushbu ma'lumot ushbu avtomobilni sotib olgan barcha mijozlar Ford MOTOR KOMPANIYASINING muntazam yuqori tashqi qiyofasi sifat standartlaridan buzilganligi to'g'risida xabardor ekanliklariga ishonch hosil qilish uchun ushbu ma'lumotga kiritilgan.[9][10]

1964 yil NHRA Super Stock yig'ilishi momaqaldiroq bilan ushlandi. Biroq, NHRA Top Stock Eliminator-ning uchta unvonini ham Chrysler Race Hemi yutdi.^[11] Taxminan yarim asr o'tgach, 2013 yilda Thunderbolt yangi SS / A rekordini o'rnatdi, chorak milda 8,55 soniya, yopilish tezligi 154 milya,^[12]

1963 yilda Dik Brannan iyul oyining issiq kunida NHRA Super / Stock National rekordini 12.42 darajasida o'rnatdi. Yilning eng katta poygasi - INDY Nationals-da, Ed Martinning engil vaznli Galaksi Super Boks kubogini Jon Barkerning Dodjiga yutqazdi, ammo buzilish paytida Dodge-da noqonuniy kamerasi borligi aniqlandi. Drag-poyga bo'yicha 427 Ford Galaxie ketma-ket uchta Milliy tadbirda g'olib bo'ldi: '64 Indy Nationals, 1965 WinterNationals va 1965 Indy Nationals. Mayk Shmitt Desert Motors Galaxie-ni 1964 yilgi Indy Nationals-da AA / SA Class g'olibligiga olib borgan. 1965 Winternationals-da bu toza kurash edi, chunki Dag Butlerning to'rt tezlikli tezligi AA / S-da 12.77 @ 114.21 bilan g'alaba qozondi va Bill Xanyon avtomatik ravishda 12.24 @ 117.95 bilan g'alaba qozondi. Bundan tashqari, Bud Schellenbergerning "Double A Stock" 1964 yildagi Galaxie, 12.16 @ 114.21 bilan 1965 yil Indy Nationals-ning eng yaxshi aktsiyadorlari bo'lgan. 427 ta yuqori quvvatli SOHC bilan jihozlangan Shelby Super Snake yuqori yoqilg'i dragsteri NHRA musobaqasida olti soniya chorak millik vaqt to'sig'ini buzgan birinchi avtomobil bo'ldi. Bu 1966 NHRA Spring Nationals g'olibi edi. O'tgan har o'n yilda FE drag-racing rekordlarini qayd etdi. 2011 yilda yangi o'n yil NHRA SS / F bilan ochiladi (sinf qoidalariga stokni siqish koeffitsienti, stok klapanlari o'lchamlari, stok karbonhidratlarining o'lchamlari va boshqalar kiradi) OEM - turdagi uskunalarning cheklovlari) milliy rekord: chorak mil 9,29 soniyada, yopilish tezligi 143,63 milya.

Boshqa yopiq poyga poygalari

1970 yilda FE dvigatelli transport vositasi Buyuk Britaniyaning quruqlikdagi tezligini rekord o'rnatdi Toni Densham Britaniyaning er tezligi bo'yicha yangi rekordini 207,6 milya (334,1 km / soat) dan oshiq uchib ketgan kilometrga o'rnatdi (o'rtacha ikki marotaba qarama-qarshi yo'nalishda harakatlanish soat) va keyin 30 yildan ortiq vaqt davomida rekord o'rnatildi. FE rusumli avtoulov Buyuk Britaniyaning g'ildiraklar bilan boshqariladigan rasmiy rekordini 500 km va 500 km masofalarda bosib o'tdi, shu vaqtgacha Sir Malkolm Kempbell tomonidan 174,883 milya^[13]

Maxsus avtomobillar

FE dvigateli maxsus qurilmalarda keng qo'llaniladi. Ko'p karbürator va boshqa ekzotik qabul qilish moslamalari, shuningdek, boshqa ko'plab "kiyinish qismlari" ning mavjudligi, dvigatel namoyish etiladigan joyda foydalanishga yordam berdi. FElar asl nusxada ishlaydi Batmobillar tomonidan qurilgan Jorj Barris uchun 1966 yil teleseriallar. Bat-ray, Bat-ram, burunga o'rnatilgan alyuminiy zanjir kesuvchi va 5,500 funt sterlingli vositaning barcha qo'llab-quvvatlovchi uskunalari bilan birga kapot ostiga sig'adi. Bitta dragstrip versiyasi Holman-Moody-ning 427 FE-ni to'rtburchaklar bilan jihozlangan edi, ular ikkinchi vitesda ishga tushirilib, g'ildiraklarini trassaning butun chorak mil uzunligida aylantiradi.^[14] 1968 yilda Kerrol Shelbi Kaliforniya maxsus modeli va eksperimental Ford 428 FE (CJX nomi bilan tanilgan, 428 Cobra Jet kashfiyotchisi) yordamida maxsus Mustang yaratdi. Ushbu "Yashil Hornet"^[15] odatiy mustaqil orqa osma, to'rt g'ildirakli disk tormozlari va Conelec elektron nazorat ostida port yonilg'i quyish tizimiga ega edi. Bu 5,7 soniya 0-60 marta va 157 milya tezlikka ega edi, FE zavodidagi 428 kub Shelby GT500 6,5 soniya 0-60 va 128 milya tezlikda eng yuqori tezlik.^[16][17]

• 

  Anda ishlatiladigan XK juftligi Ed Rot odatiy

• 

  Batmobile

• 

  Ikki tomonlama bo'lgan FE super zaryadlovchilar ga hurmat sifatida 200 milya Kobra tomonidan mashhur bo'lgan Bill Cosby

• 

  2011 Ridler mukofoti g'olib - 1956 yil Sun Suner bilan FE SOHC (Cammer)^[18]

Tavsif

Chuqur etekli, Y shaklidagi blokni ko'rsatadigan FE kesimi

FE va FT dvigatellari Y-blokli konstruktsiyalardir, chunki silindr blokining quyilishi krank mili markaz chizig'idan pastga cho'zilib, krank mili rulmanlariga katta qat'iylik va yordam beradi. Ushbu dvigatellarda quyma krank mili markaz chizig'idan 3,625 dyuymga (92,1 mm) cho'zilib ketadi, bu krank jurnallarining pastki qismidan bir dyuymdan pastroqdir.

Bloklar ikkita katta guruhga quyildi: yuqori moylovchi va yonma yog'lar. Yuqori yog 'bloki birinchi navbatda yuqori markazga yog' yubordi, yon moylar bloki birinchi navbatda blokning pastki qismida joylashgan o'tish joyi bo'ylab yog 'yubordi.

Barcha FE va FT dvigatellarining teshiklari oralig'i (silindr markazlari orasidagi masofa) 4,630 dyuym (117,6 mm) va pastki balandligi (krank markazidan blok yuqorisigacha bo'lgan masofa) 10,70 dyuym (258,3 mm). Asosiy jurnal (krank milining yotqizgichi) diametri 2,749 dyuym (69,8 mm). O'sha vaqtdagi Ford dvigatellari oilasida FE na eng katta, na kichik blok edi.

FE yog 'oqimi yo'llari

FE hech qachon butunlay statik dizayn bo'lmaganligi va doimiy ravishda Ford tomonidan takomillashtirilganligi sababli FE ning ma'lum bir versiyasiga murojaat qilish qiyinlashishi mumkin. Odatda, ko'pgina FElarni quyidagi tavsiflovchilar yordamida tavsiflash mumkin:

1) Karbüratör soni, ya'ni bitta 2V (ikki bochka), bitta 4V, ikkita to'rtburchak (ikkita 4V karbüratör), tripower (uchta 2V karbüratör) yoki Weber (to'rtta 2V Weber karbüratörleri).

2) Top-yog 'yoki yonma-moy bloki (garchi zavodda top-moylovchi sifatida burg'ulangan yonma-moy bloklari holatlari mavjud bo'lsa-da, ehtimol ularni sifat nazorati muammolari bilan to'ldirishga to'sqinlik qiladigan bloklarni qutqarish uchun).

3) Bosh turi: kam ko'tarilgan, o'rtacha ko'tarilgan, baland ko'tarilgan, tunnel porti yoki SOHC. Ushbu tavsiflar aslida boshlar bilan ishlatiladigan qabul qilishlarga taalluqlidir ... past Hoodline ostiga sig'dirish uchun mo'ljallangan past ko'taruvchi qabul qilish eng dastlabki dizayn edi. Yuqori ko'tarilishni qabul qilish uchun bo'shatish uchun o'rnatilgan avtomobillarning kapotida pufakcha kerak edi. Past va o'rta ko'taruvchi boshlarni past yoki o'rta ko'taruvchi qabul qilish bilan birgalikda ishlatish mumkin bo'lsa, yuqori ko'taruvchi bosh qabul qilish portining balandligi oshishi sababli yuqori ko'tarilishni talab qildi. O'rtacha ko'targichning qabul qilish porti past balandlikdagi portga qaraganda balandroq, lekin kengroq. Yuqori balandlikdagi portlar pastroq yoki o'rta darajadagi portlarga qaraganda balandroq. Havo-yonilg'i aralashmasi kameraga yanada chigallashgan yo'lni bosib o'tishi uchun karbüratörü past darajada ko'tarilgan qabul qilish moslamalari nisbatan pastroq joylashtirilgan. Yuqori ko'taruvchini qabul qilish karbüratörü taxminan 6 dyuym (152 mm) balandroq qilib qo'yadi, shuning uchun havo-yonilg'i aralashmasi kameraga to'g'ri yo'lga ega. Tunnelport va SOHC boshlari ikkala turdagi FE bloklariga mahkamlangan, ammo o'zlarining mos keladigan qabul qilishlarini talab qilishgan. Asosiy bosh guruhlar ichida, shuningdek, kichkina kameralar, ishlov berilgan kameralar va katta kameralar bilan jihozlangan dizayndagi farqlar mavjud edi. Kameraning kattaligi va turi siqilish koeffitsientiga, shuningdek, dvigatelning umumiy ishlash xususiyatlariga ta'sir ko'rsatdi.

1-avlod

332

Eng kichigi ko'chirish FE dvigateli (5,4 L) "332" da 331,8 kubometrni tashkil etdi, 4,0 dyuymli (101,60 mm) teshik va 3,3 (83,82 mm) zarba bilan. U 1958 va 1959 yillarda Ford markali avtomobillarda, 1959 yilda mahalliy bozorda AQSh va Kanadada ishlab chiqarilgan Edsel rusumli avtomobillarda va 1958 va 1959 yillarda eksportga mo'ljallangan Edselsda ishlatilgan.^{[19][20][21][22]} The ikki bochka versiyada 240 ot kuchiga ega (179,0 kVt), to'rt barreli bo'lgan Holley yoki Autolite versiyasida 265 ot kuchiga ega (197,6 kVt).

332 dvigatel konfiguratsiyasi va ilovalari

Birinchi avlod FE blokini 352, 383, 390, 430 Merkuriy MEL bloklari bilan adashtirmaslik kerak, ular FE bloklaridagi kabi boshlarida emas, balki bloklarida xanjar shaklidagi yonish kamerasi bo'lgan.

• 4V, 9.5: 1 - 265 ot kuchi (197.6 kVt) 4600 rpm da va 360 lb⋅ft (488 nm) da 2800 rpm.
  • 1958 yil Ford
  • 1958 Edsel Ranger, Pacer, Qishloq, Yaxlitlamoq va Bermuda faqat chet elga eksport qilinadigan transport vositalari
• 2V, 8.9: 1 - 4600 rpm da 225 ot kuchiga ega (167.8 kVt) va 2200 rpmda 325 lb⋅ft (441 Nm).
  • 1959 yil Ford
  • 1959 Edsel Corsair va Qishloq, standart uskunalar, ("Express V8" deb nomlangan)^[19]

352

1964 yilda 352 FE V8 Galaxie 500 XL

1958 yilda Ford V8 dvigatellarining Interceptor liniyasi tarkibiga kiritilgan, 351,86 kub hajmdagi (35,78 L) Ford 352, Linkoln Y-blokining o'rnini egalladi. Bu 3,5 dyuymli (88,90 mm) zarba va 33 dyuymli (101,60 mm) teshikli 332 zarbasi va 2 barreli karbürator bilan 208 ot kuchiga (155,1 kVt) teng bo'lgan 300 ot kuchiga (223,7 kVt) teng. -barrel modellari. Ushbu dvigatellar taqdim etilganda, ular chaqirildi Interceptor V-8 asosiy modellarda va Interceptor Special V-8 4 barrelli modellarda.^[20] 1958 yildagi H vin kodli kod 352 sifatida belgilangan Interceptor V-8 Thunderbird Maxsus 1958 yil Ford V8 Cars & Thunderbird Service Manual pg 483 ga muvofiq. Interceptor 1958 yilda asosiy ishlaydigan dvigatel bo'lgan. 1959 model yilida FE dvigatellari seriyasi o'zgartirildi Thunderbird V-8 va Thunderbird Special V-8.^[21] Merkuriy transport vositalariga o'rnatilganda ushbu dvigatellar "Marauder" deb nomlangan. Ushbu ketma-ket dvigatellarning og'irligi odatda 650 funtdan (295 kg) oshgan.^[23] 1960 yilda Ford 352 ning 360 ot kuchiga (270 kVt) teng bo'lgan yuqori mahsuldorligini yaratdi, unda alyuminiy assimilyatsiya manifoldu mavjud edi, Xolli 4160 4-bochka (4-bo'g'ma) karbüratör, quyma temirdan yasalgan sarlavha uslubidagi egzoz manifoldlari, 10.5: 1 siqilish darajasi va qattiq ko'taruvchilar.

352 dvigatel konfiguratsiyasi va ilovalari

• 2V
  • 8.4: 1 - 208 ot kuchi (155 kVt) 4000 devir / min va 310 lb⋅ft (420 Nm) - 2800 rpm.
    • 1965–1967 Ford F seriyali
  • 8.9: 1 - 220 ot kuchi (160 kVt) 4400 rpm va 370 lb⋅ft (502 Nm) 2400 rpm.
    • 1961-1963 yillar Ford
    • 1961-1963 yillar Merkuriy (1961 yil) Meteor va 1961-1963 yillar Monterey, Yurishdagi vagon, Koloniya parki )
• 4V
  • 10.2: 1 - 300 ot kuchi (220 kVt) 4600 rpm va 395 lb⋅ft (536 Nm) 2800 rpm.
    • 1958 yil Ford Interceptor
    • 1958-1959 yillar Ford
    • 1958–1959 Ford Thunderbird
  • 9.6: 1 - 300 ot kuchi (220 kVt) 4600 rpm va 380 lb⋅ft (515 nm) 2800 rpm.
    • 1960 yil Ford
    • 1960 Edsel^[24]
    • 1960 Ford Thunderbird
  • 10.6: 1 - 360 ot kuchi (270 kVt) 6000 rpm va 380 lb⋅ft (515 nm) 3400 rpm.
    • 1960 yil Ford
  • 8.9: 1 - 235 ot kuchi (175 kVt) 4400 rpm va 350 lb⋅ft (475 nm) 2400 rpm.
    • 1960 yil Ford
  • 9.3: 1 - 250 ot kuchi (190 kVt) 4400 rpm va 352 lb⋅ft (477 Nm) 2800 rpm.
    • 1964-1966 yillar Ford

1958 yil ma'lumot uchun reklama

361 Edsel

1959 yilda 361 FE V8 Edsel Corsair

Edsel 361 dvigatellari Ogayo shtati Klivlend va Michigan shtatining Dyorborn shahrida yig'ilgan. Ular 1958 yilda standart uskunalar edi Edsel Ranger, Pacer, Qishloq, Yaxlitlamoq va Bermuda.^[22]Edsel 361 har qanday bozorda sotuvga qo'yilgan birinchi FE blokli dvigatel bo'lib, 1957 yil 4 sentyabrda, 1958 yilgi har qanday Fords sotilishidan deyarli ikki oy oldin AQShda ommaga tanishtirildi.^[25]361 cid 4V FE dvigatellari 1959 yilda AQSh va Kanadada Edselsda, 1958 va 1959 yillarda esa Kanadadagi Ford va Meteor markali avtomobillar 352 tsid o'rniga sotilgan, bu Kanadaning Ford Motor Company brendiga qadar mavjud emas edi. 1960 yil. Edsel 361 dvigatellari AQSh huquqni muhofaza qilish idoralari va shtat va shahar favqulodda xizmatlari tomonidan 1958 yil Ford "Politsiya quvvat to'plami" sifatida Fords flotini sotib olgan.^[26][27][28]

361 Edsel dvigatelining konfiguratsiyasi va ilovalari

• 4V
  • 10.5: 1 siqishni darajasi
  • 303 ot kuchi (225,9 kVt) @ 4600 rpm
  • 400 lb⋅ft (542 N⋅m) moment @ 2800 rpm
  • 4.0469 dyuym (102.79 mm) x 3.5 dyuym (88.90 mm) teshik / zarba
  • 4-barbli Holley yoki Ford (Avtolit) karbüratörü
  • Havo supapi
  • Burchakli takoz bilan ishlov berilgan yonish kamerasi
  • Otish tartibi: 1-5-4-2-6-3-7-8
  • Tsilindrni raqamlash (old tomondan orqaga): O'ng 1-2-3-4 Chap 5-6-7-8
  • 18 mm shamlar, 0,034 dyuymli bo'shliq
  • 1958 Edsel Ranger, Pacer, Qishloq, Yaxlitlamoq va Bermuda, standart uskunalar ("E400" deb nomlangan)
• 4V
  • 9.6:1^[19][29] yoki 10.0: 1 ma'lumot manbasiga qarab siqishni darajasi.^[30][31]
  • 303 ot kuchi (225,9 kVt) @ 4600 rpm
  • 390 lb⋅ft (529 N⋅m) moment @ 2800 rpm
  • 4.0469 dyuym (102.79 mm) x 3.5 dyuym (88.90 mm) teshik / zarba
  • 4-barb Ford (Avtolit) karbüratori
  • Havo supapi
  • Burchakli takozli quyma yonish kamerasi
  • Otish tartibi: 1-5-4-2-6-3-7-8
  • Tsilindrni raqamlash (old tomondan orqaga): O'ng 1-2-3-4 Chap 5-6-7-8
  • 18 mm shamlar, 0,034 dyuym
  • 1959 Edsel Corsair, Qishloq va Ranger, ixtiyoriy uskunalar ("Super Express V8" deb nomlangan)

360 yuk mashinasi

The 360(5.9 L) hajmdagi 360.7 kubometrning 1968 yilda joriy qilingan va 1976 yil yakunida bekor qilingan; u ishlatilgan Ford F seriyali yuk mashinalari va pikaplar. U 390 (4,05 dyuym (102,87 mm)) teshikka ega va 352 ning 3,5 dyuymli (88,90 mm) burilish moslamasidan foydalangan. 360-lar, shuningdek, yuk mashinalarini ishlatish uchun og'ir ichki qismlar bilan qurilgan. Karbüratör va distribyutor sozlamalari bilan birga yo'lovchi avtoulovlarda foydalanish uchun standart 352/390 kameradan foydalanish 360-ga 352 va 390 rusumli dvigatellarnikiga o'xshash ish faoliyatini ta'minlashga imkon berdi. 2100 ot kuchiga teng (160,3 kVt) 4100 rpm va 375 lb⋅ft (508 N⋅m) moment @ 2600 rpm (2 barreli karb, 1968). 360, xuddi shu blokdan, boshlardan va boshqa qismlardan 390 bilan foydalangan, bu zarba o'lchanmasa, ularni bir-biridan ajratib bo'lmaydi.

360 yuk mashinalari dvigatelining konfiguratsiyasi va ilovalari

• 2V, 8.4: 1
  • 2100 ot kuchi (160,3 kVt) 4100 rpmda va 375 lb⋅ft (508 Nm) 2600 rpmda
    • 1968–1971 yillarda yuk mashinalari^[32]
  • 196 ot kuchiga ega (146 kVt) to'r 4000 dev / min va 327 lb⋅ft (443 Nm) da 2400 rpm.
    • 1972–1976 yillarda yuk mashinalari

390

1969 yilda 390 FE V8 Ford Mustang

390,06 kub (6,4 L) haqiqiy siljish bilan 390, teshik 4,05 dyuym (102,87 mm) va zarba 3,785 dyuym (96,14 mm) bo'lgan. Ko'pgina Ford avtoulovlarida standart dvigatel sifatida va ko'plab yuk mashinalarida ishlatilgan keyingi dasturlarda bu eng keng tarqalgan FE dvigateli edi. Bu mashhur yuqori samarali dvigatel edi;^[33] garchi 427 va 428 modellari kabi kuchli bo'lmasa-da, ayniqsa engil vaznli transport vositalarida yaxshi ishlashni ta'minladi. (6,4 L) 2v 390 kub 265 ot kuchiga teng (197,6 kVt) @ 4100 rpm, 4v versiyasi esa 320 ot kuchiga (238,6 kVt) @ 4100 rpm tezlikda ma'lum dasturlarda baholandi. Ayrim 1967 & 68-yilgi Mustanglarda Fairlane GT va S kodidagi Mercury Cougars kabi 335 ot kuchiga (250 kVt) teng bo'lgan 390 4v dvigatellar mavjud edi. Birinchi marta 390 1961 yildagi modelga taklif qilinganida 375 ot kuchiga ega bo'lgan (280 kVt) yuqori mahsuldorlik alyuminiy 4 baravarlik assimilyatsiya manifoldu, quyma temirdan yasalgan "boshcha" uslubidagi egzoz manifoldlari, 10,5: 1 siqish koeffitsienti va qattiq ko'taruvchi valfli poezd mavjud edi. Ushbu avtoulovlarning aksariyati magistralda diler tomonidan o'rnatilishi kerak bo'lgan alyuminiy 3x2bbl assimilyatsiya manifoldu bilan birga kelgan va dvigatelning ishini 401 ot kuchiga (299 kVt) etkazgan.

390 dvigatel konfiguratsiyasi va ilovalari

• 2V
  • 8.9: 1 - 250 ot kuchi (190 kVt) 4400 rpm va 378 lb⋅ft (512 nm) 2400 rpm.
    • 1963–1965 yillarda Merkuriy
  • 9.4: 1 - 266 ot kuchi (198 kVt) 4600 rpm va 378 lb⋅ft (512 nm) 2400 rpm.
    • 1964-1965 yillarda Merkuriy
  • 9.5: 1 - 275 ot kuchi (205 kVt) 4400 rpmda va 401 lb⋅ft (544 nm) 2600 rpmda.
    • 1966 yil Ford
    • 1966 yil Ford Fairlane
    • 1966 yil Merkuriy
    • 1966 yil Merkuriy kometasi
  • 9.5: 1 - 2700 ot kuchi (200 kVt) 4400 rpm va 401 lb⋅ft (544 nm) 2600 rpm.
    • 1967 yil Ford
    • 1967-1968 yillarda Ford Fairlane
    • 1967 yil Merkuriy
    • 1967 yil Merkuriy kometasi
    • 1968 yil Ford Mustang
    • 1968 yil Merkuriy siklon GT
    • 1968 yil Mercury Cougar GT
  • 10.5: 1 - 280 ot kuchi (210 kVt) 4600 rpm va 427 lb⋅ft (579 nm) 2800 rpm.
    • 1968 yil Ford
    • 1969 yil Merkuriy
  • 9.5: 1 - 2600 ot kuchi (198 kVt) 4400 rpm va 401 lb⋅ft (544 nm) 2600 rpm.
    • 1968 yil Ford Fairlane
    • 1968 yil Ford Torino
    • 1968-1970 yillar Ford
    • 1968-1970 yillarda Merkuriy
  • 8.6: 1 - 255 ot kuchi (190 kVt) 4400 rpm va 376 lb⋅ft (510 nm) 2600 rpm.
    • 1968–1971 yillarda yuk mashinalari^[34]
  • 9: 1 - 4400 rpmda 255 ot kuchi (190 kVt) va 2600 rpmda 376 lb⋅ft (510 Nm).
    • 1971 yil Ford, Merkuriy
  • 8.2: 1 - 201 ot kuchi (150 kVt) to'r 4000 rpm va 376 lb⋅ft (510 Nm) 2600 rpm.
    • 1972–1975 yillarda yuk mashinalari
• 4V
  • 10.6: 1 - 375 ot kuchi (280 kVt) 6000 rpm va 427 lb⋅ft (579 nm) 3400 rpm.
    • 1961-1962 yillar Ford
  • 9.6: 1 - 300 ot kuchi (220 kVt) 4600 rpm va 427 lb⋅ft (579 nm) 2800 rpm.
    • 1961-1963 yillar Ford
    • 1961-1963 yillarda Ford Thunderbird
    • 1963 Merkuriy
  • 9.6: 1 - 330 ot kuchi (250 kVt) 5000 rpm va 427 lb⋅ft (579 nm) 3200 rpm.
    • 1961–1963 yillarda Ford politsiyasining aralashuvi
    • 1963 yil Merkuriy politsiyasining aralashuvi
  • 10.1: 1 - 330 ot kuchi (250 kVt) 5000 rpm da va 427 lb⋅ft (579 Nm) da 3200 rpm.
    • 1964 yil Ford politsiya aralashuvi
    • 1964 yil Merkuriy politsiyasining aralashuvi
  • 11: 1 - 4600 rpmda 300 ot kuchi (220 kVt) va 2800 rpmda 427 lb⋅ft (579 Nm).
    • 1964-1965 yillar Ford
    • 1964-1965 yillarda Merkuriy
    • 1964–1965 yillarda Ford Thunderbird
  • 10.5: 1 - 3100 ot kuchi (235 kVt) 4600 rpm va 427 lb⋅ft (579 nm) 2800 rpm.
    • 1966-1967 yillar Ford
    • 1966-1968 yillarda Ford Thunderbird
    • 1968 yil Merkuriy
  • 10.5: 1 - 335 ot kuchi (250 kVt) 4600 rpm va 427 lb⋅ft (579 nm) 3200 rpm.
    • 1967, 1969 Ford Mustang
    • 1967, 1969 Ford Fairlane
    • 1967, 1969 yillarda Merkuriy siklon GT
    • 1967, 1969 yillarda Mercury Cougar GT
    • 1969 yil Ford Torino
    • 1969 yil Merkuriy Montego
  • 10.5: 1 - 3200 ot kuchi (242 kVt) 4800 rpm da va 427 lb⋅ft (579 nm) da 2800 rpm.
• 3x2V, 10.6: 1
  • 6000 rpmda 401 ot kuchi (299 kVt) va 3500 rpmda 430 lb⋅ft (580 Nm)
    • 1961-1962 yillar Ford
  • 6000 rpmda 340 ot kuchi (250 kVt) va 3500 rpmda 430 lb⋅ft (580 Nm).
    • 1962 yil Ford
    • 1962-1963 yillarda Ford Thunderbird

2-avlod

406

406 TriPower qabul qilish va uglevodlar bilan, a Ford Galaxie.

406 dvigatelida 390 ning 3,785 dyuymli (96,14 mm) zarbasi bilan yangi 4,13 dyuymli (104,90 mm) teshik ishlatilgan va rasmiy belgilash uchun "406" gacha yaxlitlangan (6,6 L) 405,7 kub hajmdagi suv o'tkazmasi bo'lgan. Kattaroq teshik uchun qalinroq devorlarni yaratishga imkon beradigan yangi blokli quyma dizayni kerak edi, aks holda 390 blokka juda o'xshash edi.^[35]

U 427 bilan almashtirilgunga qadar ikki yildan kamroq vaqt davomida mavjud edi.

406-ni sinovdan o'tkazish, uning yuqori quvvat darajalari bilan o'zaro faoliyat murvatli tarmoqlarga olib keldi, ya'ni asosiy tirgak qopqoqlari nafaqat pastdan yuqoriga ko'tarilgan boltlar bilan, balki yon tomondan yon tomondan kirib kelgan murvatlar bilan ham ta'minlandi. blokirovka qilish. Qopqoq va blokirovka yuzi o'rtasida moslashtirilgan ajratgich ishlatilgan. Ushbu dizayn o'ta poyga sharoitida asosiy rulman qopqoqlarini "yurish" ga to'sqinlik qildi va bugungi kunda ko'plab ishlab chiqaruvchilarning eng kuchli va zamonaviy dvigatellarida mavjud.

406 dvigatel konfiguratsiyasi va ilovalari

• 4V, 11.4: 1 - 5800 rpmda 385 ot kuchi (287 kVt) va 3400 rpmda 444 lb⋅ft (602 Nm).
  • 1962-1963 yillar Ford
  • 1963 Merkuriy
• 3x2V, 11.4: 1 - 5800 rpmda 405 ot kuchi (302 kVt) va 3500 rpmda 448 lb⋅ft (607 Nm).
  • 1962 yil Ford
• 3x2V, 12.1: 1 - 5800 rpmda 405 ot kuchi (302 kVt) va 3500 rpmda 448 lb⋅ft (607 Nm).
  • 1963 yil Ford, Merkuriy

410

The 410 dvigatel, 1966 va 1967 yillarda ishlatilgan Merkuriylar (qarang Ford MEL dvigateli 1958 yilgi katta seriyali Edsels), 390 dvigatel bilan bir xil 4.05 dyuym (102.87 mm) teshikdan foydalangan, ammo 428 ning 3.98 dyuym (101.09 mm) zarbasi bilan 410.1 kub (6.7 L) joy almashinuvini ta'minlagan. Standart 428 krank mili ishlatilgan, ya'ni 410, 428 kabi, tashqi muvozanatni ishlatgan. A siqilish darajasi 10.5: 1 standart edi.

410 dvigatel konfiguratsiyasi va ilovalari

• 4V, 10.5: 1 - 330 ot kuchi (250 kVt) 4600 rpm va 444 lb⋅ft (602 Nm) 2800 rpm.
  • 1966-1967 yillarda Merkuriy

427

1966 yilda 427 FE V8 Galaksiya XL

The 427 V8 ham yuqori, ham yonma moy sifatida ishlab chiqarilgan. 1963 yilda ishlab chiqarilgan, uning haqiqiy siljishi 425,98 kub dyuymni tashkil etdi, ammo Ford uni 427 deb atadi, chunki 7 litr (427 kub) bu ​​o'sha paytdagi bir nechta poyga tashkilotlari tomonidan ruxsat etilgan maksimal siljish edi. Qon tomirlari 3.784 dyuym (96.11 mm) bo'lgan 390 bilan bir xil edi, ammo teshik 4.2328 dyuym (107.51 mm) ga oshirildi. Blok yuqori siqilishga bardosh beradigan, ayniqsa qalinlashgan pastki bilan quyma temirdan yasalgan. Shilinglar yonbosh barg shakllari yordamida quyilgan - har bir silindrning devorlari bo'ylab burchaklari qalinroq bo'lgan. Ko'pgina 427-lar po'lat krank milidan foydalangan va ularning barchasi ichki muvozanatlashgan. Ko'pgina 427-larda qattiq valfli ko'targichlar ishlatilgan, 1968 yilgi blok bundan mustasno, gidravlik ko'taruvchilar bilan ishlatish uchun burg'ulangan. Uyg'un kirish joylari bo'lgan bo'shliqni tejaydigan tunnel-port boshlari mavjud bo'lib, ular guruch tunnellaridagi qabul qilish portlari orqali qo'zg'alishlarni boshqargan. Poyga uchun mo'ljallangan dvigatel sifatida uning zavodda ham, keyingi bozorda ham ko'plab ishlash qismlari mavjud edi. Musobaqaga tayyor NASCAR 13.6-1 baland ko'taruvchisi ohangga qarab +550 ot kuchiga mos edi. Ushbu dvigatel mashhur Fairlane Thunderbolt kabi A / FX-mashinalarida ham ishlatilgan.

Ikki xil 427 ta blok ishlab chiqarildi yuqori yog ' va yon moy. Yog 'yoqilg'isining eng yuqori versiyasi avvalroq bo'lgan va birinchi navbatda moy va valvetrainga, ikkinchidan esa krankka etkazib berildi. 1965 yilda ishlab chiqarilgan yon moy, birinchi navbatda krankka yog ', ikkinchidan kamar va valvetrain yubordi. Bu avvalgi moylash dizayniga o'xshash edi Y-blok. Dvigatel kam qavatli, o'rta yoki baland boshli va har bir bosh konstruktsiyasiga mos keladigan alyuminiy manifoldidagi bitta yoki ikkita to'rt barreli karbüratörlerle mavjud edi. Ford hech qachon rasmiy quvvat reytingini chiqarmagan.

427 Ford ixlosmandlari orasida mashhur dvigatel bo'lib qolmoqda.

• 

  FE 427 egzozlari. Chapdan o'ngga: Factory Ford quyma temir sarlavhasi, krossover naychalari bilan sotuvdan keyingi sarlavhasi, sotuvdan keyingi Tri-Y dizayni, GT40 da foydalanish uchun Factory Ford dizayni "ilonlar to'plami"

• 

  FE 427 in'ektsion manifoldlari. Left to right: Algon (1 of 2 versions), Tecalmit-Jackson, Hilborn (converted to EFI), Factory Ford design tunnelport crossram for use in the GT40

• 

  Tunnelport intake showing the brass tubes for the pushrods o'tmoq

427 SOHC "Cammer"

A 427 Cammer once used by Ford's "X-Garage" skunkworks

Ford's seven litre Cammer SOHC V8 engine showing cam, rockers and timing chains

The Ford single overhead cam (SOHC) 427 V8 engine, familiarly known as the "Cammer",^[36] was released in 1964 in an effort to maintain NASCAR dominance by seeking to counter the enormously large block Chrysler 426 Hemi "elephant" engine. The Ford 427 block was closer dimensionally to the smaller 392 cu. in. first generation Chrysler FirePower Hemi; the Ford FE's bore spacing was 4.63 in (117.6 mm) compared to the Chrysler 392's 4.5625 in (115.9 mm). The Ford FE's deck height of 10.17 in (258.3 mm) was lower than that of the Chrysler 392 at 10.87 in (276.1 mm). For comparison, the 426 Hemi has a deck height of 10.72 in (272.3 mm) and bore spacing of 4.8 in (121.9 mm); both Chrysler Hemis have decks more than 0.5 in (12.7 mm) taller than the FE.

The engine was based on the high performance 427 side-oiler block, providing race-proven durability. The block and associated parts were largely unchanged, but an idler shaft replaced the eksantrik mil in the block, which necessitated plugging the remaining camshaft rulman oiling holes.

The cast-iron heads were designed with yarim shar shaklida yonish kameralari va bitta ustki kam mil over each head, operating shaft-mounted roller rocker qurollari. The valvetrain consisted of valves larger than those on Ford wedge head engines, made out of zanglamaydigan po'lat va bilan natriy to'ldirilgan egzoz klapanlari to prevent the valve heads from burning, and dual valve springs. This design allowed for high volumetric efficiency at high engine speed.

The idler shaft in the block in place of the camshaft was driven by the vaqt zanjiri and drove the distribyutor va neft nasosi in conventional fashion. An additional sprocket on this shaft drove a second "serpentine" timing chain, 6 ft (1.8 m) long, which drove both overhead camshafts. The length of this chain made precision timing of the camshafts an issue at high rpms.

The engine also had a dual-point distributor with a transistorized ignition amplifier system, running 12 amper of current through a high-output ignition coil.

The engines were essentially hand-built for racing, with combustion chambers fully machined to reduce variability. Nevertheless, Ford recommended loyihalash before use in racing applications. With a single four-barrel carburetor they weighed 680 lb (308 kg)^[37] and were rated at 616 horsepower (459 kW) at 7,000 rpm & 515 lb⋅ft (698 N⋅m) of torque @ 3,800 rpm, with dual four-barrel carburetors 657 horsepower (490 kW) at 7,500 rpm & 575 lb⋅ft (780 N⋅m) of torque @ 4,200 rpm. Ford sold them via the parts counter, the single four-barrel model as part C6AE-6007-363S, the dual carburetor model as part C6AE-6007-359J for $2350.00 (as of October, 1968).

Ford's hopes to counter Chrysler were, however, cut short. Although enough 427 SOHCs were sold to have the design homolog, Chrysler protests succeeded in getting NASCAR to effectively legislate the engine out of competition. This was due to the motor not being available in a factory production motor vehicle.^[38] It was not the only engine ever banned from NASCAR; the 1963 Chev 427 ‘mystery motor’, the 1965 426 ‘Race Hemi’ and the Chrysler A-925 DOHC Hemi were also was banned during the 1960s for the same reason.^[38] This scuttled the awaited 1965 SOHC versus Hemi competition at the Daytona 500 season opener.

Nevertheless, the SOHC 427 found its niche in non-stock drag racing, powering many altered-wheelbase A/FX Mustangs,^[36] and becoming the basis for a handful of supercharged Eng yaxshi yoqilg'i dragsters, including those of Konni Kalitta, Pit Robinson va Lou Baney (driven by Don "the Snake" Prudhomme ). In 1967 Connie Kalitta's SOHC-powered "Bounty Hunter" slingshot dragster won Top Fuel honors at AHRA, NHRA and NASCAR winter meets, becoming the only "triple crown" winner in drag racing history.^[39] It was also used in numerous nitro funny cars including those of Jek Krisman, "Dyno" Don Nicholson, Eddie Schartman, Kenz & Leslie, and in numerous injected gasoline drag racing vehicles.

427 engine configurations and applications

• Low-riser intake, 4V
  • 10.9:1 — 390 horsepower (290 kW) at 5600 rpm and 460 lb⋅ft (620 N⋅m) at 3200 rpm
    • 1968 Mercury Cougar GT-E only (it was to be offered in the Ford Mustang, according to early press releases, but there are no records or verification of any factory 427 Mustangs). In the spring of 1968, the 428 Cobra Jet officially replaced the 427; however, leftover 427s were installed until late June of that year, when stocks were depleted.
  • 11.6:1 — 410 hp (416 PS; 306 kW) at 5600 rpm and 476 lb⋅ft (645 N⋅m) at 3400 rpm
    • 1963–1964 Ford
    • 1963–1964 Mercury
• Low-riser intake, 2x4V
  • 12:1 — 425 horsepower (317 kW) at 6000 rpm and 480 lb⋅ft (651 N⋅m) at 3700 rpm
    • 1964 Ford Fairlane Thunderbolt, Mercury:
• High-riser intake, 2x4V
  • 13.6:1 — +550 horsepower (410 kW) at 7000 rpm and 480 lb⋅ft (651 N⋅m) at 4700 rpm
    • 1966–1967 Ford Fairlane 500 "R-Code",^[40] Merkuriy
• Mid-riser intake, 4V
  • 11.6:1 — 410 horsepower (310 kW) at 5600 rpm and 476 lb⋅ft (645 N⋅m) at 3400 rpm
    • 1965–1967 Ford
    • 1965–1967 Mercury
• Mid-riser intake, single 4-barrel Xolli 780 CFM karbüratör
  • 11.5:1 — 425 hp (431 PS; 317 kW) at 6000 rpm and 480 lb⋅ft (651 N⋅m) at 3700 rpm
    • 1965–1967 Ford
    • 1965–1967 Mercury
    • 1965–1967 Shelby Cobra 427.^[41]

428

Ford FE 428 Special Interceptor engine from a 1967 Shelby G.T. 500

With its 4.235 in (107.57 mm) zerikarli size, the 427 block was expensive to manufacture as the slightest shifting of the casting cores could make a block casting unusable. Therefore, Ford combined attributes that had worked well in previous incarnations of the FE – a 3.985 in (101.22 mm) qon tomir and a 4.135 in (105.03 mm) bore – to create an easier-to-make engine with nearly identical ko'chirish. The 428 cu in (7.0 L) engine used a cast nodular iron krank mili and external balancer.

428 FE engines were fitted to Galaktikalar (badged simply as '7 Litre') and Momaqaldiroq qushlari in the 1966 and 1967 model years. It was also found in Mustangs, Mercury Cougars, some AC (Shelby) Cobras and various other Fords. This engine was also available as standard equipment in 1966 and 1967 in the Merkuriy S-55.^[42]

428 engine configurations and applications

• 4V, 10.5:1
  • 345 horsepower (257 kW) at 4600 rpm and 462 lb⋅ft (626 N⋅m) at 2800 rpm
    • 1966–1967 Ford
    • 1966–1967 Ford Thunderbird
    • 1966–1967 Mercury
    • 1967 S-55
  • 360 horsepower (270 kW) at 5400 rpm and 459 lb⋅ft (622 N⋅m) at 3200 rpm
    • 1966–1970 Ford Police Interceptor
    • 1966–1970 Mercury Police Interceptor
  • 340 horsepower (250 kW) at 4600 rpm and 462 lb⋅ft (626 N⋅m) at 2800 rpm
    • 1968 Ford
    • 1968 Mercury
  • 360 horsepower (270 kW) at 5400 rpm and 420 lb⋅ft (570 N⋅m) at 3200 rpm
    • 1968 Shelby GT500
• 2x4V, 10.5:1 — 355 horsepower (265 kW) at 5400 rpm and 420 lb⋅ft (570 N⋅m) at 3200 rpm
  • 1967 Shelby GT500

428 Cobra Jet

The 428 Cobra Jet was a performance version of the 428 FE. Launched in April 1968, it was built on a regular production line using a variety of cylinder heads^[43] combined with a 735 CFM Holley four-barrel carburetor. The Cobra Jet used heavier connecting rods with a 13/32 rod bolt and a nodular iron crankshaft casting #1UB. A Holman and Moody specially prepared "stripper", which carried no sound deadener, undercoating, or any optional factory equipment, was used as the introductory press car in 1968.^[44]

Historical road test data on actual production 428 CJ cars suggest peak output in the neighborhood of 275 SAE Net ("as installed") HP, using published trap speed and "as tested" weights, and Hale's trap speed formula. Period road tests revealed quarter mile performance in the low 14-second to very high 13-second range, with trap speeds around 101 to 103 mph (163 to 166 km/h):^[45]

The 428 Cobra Jet engine (modified to the NHRA Aksiya va Super Stock technical specifications) made its drag racing debut at 1968 NHRA Winternationals, held from February 2–4, 1968, at the Auto Club Raceway da Los Angeles County Fairgrounds, yilda Pomona, Kaliforniya. Ford Motor Company sponsored five drivers (Gas Ronda, Jerry Harvey, Hubert Platt, "Dyno Don" Nikolson, Kenneth McLellan, and Al Joniec ) to race six 428 CJ-equipped Mustangs. They raced in classes C Stock Automatic (C/SA, 9 to 9.49 lb/hp (5.47 to 5.77 kg/kW)), based on advertised horsepower) and Super Stock E (SS/E or SS/EA, manual or automatic transmission, respectively, at 8.70 to 9.47 lb/hp (5.29 to 5.76 kg/kW), based on factored horsepower). The engine lived up to expectations as four of the cars made it to their respective class finals. Al Joniec won both his class (defeating Hubert Platt in an all-CJ final) and the overall Super Stock Eliminator title (defeating Dave Wren who ‘red lighted’ in his faster 426 Race Hemi Plymouth).^[46]

428 Cobra-Jet engine configurations and applications

• Cobra-Jet 4V, 10.8:1 — 335 horsepower (250 kW) at 5200 rpm and 440 lb⋅ft (600 N⋅m) at 3400 rpm
  • 1968 Ford Mustang
  • 1968 Mercury Cougar
  • 1968 Shelby GT500KR
  • 1968 Ford Fairlane
  • 1968 Ford Torino
  • 1968 Mercury Comet
  • 1968 Mercury Cyclone
• Cobra-Jet and Super Cobra-Jet 4V, 10.6:1 — 335 horsepower (250 kW) at 5200 rpm and 440 lb⋅ft (600 N⋅m) at 3400 rpm
  • 1969–1970 Ford Mustang
  • 1969–1970 Mercury Cougar
  • 1969 Ford Fairlane
  • 1969 Ford Torino
  • 1969 Ford Cobra
  • 1969 Mercury Montego, Cyclone and CJ

428 Super Cobra Jet

The 428 Super Cobra Jet (also known as the 428SCJ) used the same top end, pistons, cylinder heads, camshaft, valve train, induction system, exhaust manifolds, and engine block as the 428 Cobra Jet. However, the crankshaft and connecting rods were strengthened and associated balancing altered for drag racing. A nodular iron crankshaft casting #1UA was used as well as heavier 427 "Le Mans" connecting rods with capscrews instead of bolts for greater durability. The heavier connecting rods and the removal of the centre counterweight on the stock 428 Cobra Jet crankshaft (1UA), required an external weight on the snout of the crankshaft for balancing. A 428 Super Cobra Jet engine with oil cooler was standard equipment when the "Drag Pack" option (which came when selecting either a 3.91 or 4.30 rear end gear ratio) was ordered with cars manufactured from 13 November 1968. In addition, while the CJ and SCJ engines used the same autothermic piston casting, the piston-to-bore clearance specification between the CJ and SCJ 428 engines is slightly different, with the SCJ engines gaining a slightly looser fit to permit higher operating temperature.^[47] Horsepower measurements at a ko'cha rpm level remained the same.^[48] The 428 Super Cobra Jet engine was never offered with factory air conditioning due to the location of its engine oil cooler.

428 Cobra-Jet and Super Cobra-Jet engine configurations and applications

• Cobra-Jet and Super Cobra-Jet — Zerikarli 4.13 in (104.9 mm) X Qon tomir 3.98 in (101.1 mm); Valvetrain: OHV 2 valves per cylinder, tabiiy ravishda intilgan 4-barrel Xolli karbüratör, siqilish darajasi: 10.6:1 rated at 335 horsepower (340 PS; 250 kW) @ 5200 rpm and maximum moment of 440 lb⋅ft (597 N⋅m) @ 3400 rpm^{[49][50][51][52]}
  • 1969–1970 Ford Mustang
  • 1969–1970 Mercury Cougar
  • 1969 Ford Fairlane
  • 1969 Ford Torino
  • 1969 Ford Cobra
  • 1969 Mercury Cyclone

Avtomobillar

Selection of vehicles in which the FE was installed as original equipment:

• 

  1965 Ford Galaxie

• 

  1960 Ford Galaxie Starliner

• 

  1968 Ford Torino Squire

• 

  1965 Ford F100 Pick Up

• 

  1967 Ford Fairlane Ranchero

• 

  1968 GTCS

• 

  1965 Thunderbird

• 

  1963 Ford Galaxie 500 Convertible

• 

  1959 Ford Galaxie

O'zgartirish

By the mid-1970s the FE had been used in Ford vehicles extensively across three decades. To replace it, Ford had developed the 335-series engines, commonly referred to as "Cleveland" engines, and the 385-series engines. These were produced in displacements ranging from 351 cu in (5.8 L) up to 460 cu in (7.5 L), including 429 cu in (7.0 L), giving Ford V8s of 427 cu in (7.0 L), 428 cu in (7.0 L), and 429 cu in (7.0 L). The last FE was installed in a production vehicle in 1976, and in the late 1970s the Dearborn Engine Plant that produced the FE engines was completely retooled to produce the 1.6 L engine introduced in the Ford Escort in 1981.

The FE's thinwall casting production method was innovative and forward-looking in the mid-1950, resulting in lower weight and dramatically reduced production costs. Ford's competitors at the time required thicker castings to mask the flaws and defects that resulted from their processes. Improving quality and allowing thinner walls was accomplished through many engineering improvements, including reducing the number of cores required to cast an engine block. Fewer cores made it easier to assemble the overall mold for casting and reduced the number of potential problems.^[53] Ongoing enthusiast interest in the FE engine supports the continued availability of parts and engine kits needed to build or rebuild versions of the FE, notably the 427.

Adabiyotlar

Qo'shimcha o'qish

• Peter C Sessler (1999). Ultimate American V8 Engine Data Book. MotorBooks / MBI nashriyot kompaniyasi. ISBN  0-7603-0489-0.
• Steve Christ (1983). How to Rebuild Big-Block Ford Engines. New York: Berkeley Publishing Group. ISBN  0-89586-070-8.

Tashqi havolalar

• Short descriptions of Ford overhead valve V8 engines
• Supermotors article of the 427 Cammer